1. Open the door so that you can operate both the inside and outside door handles. Locate the two screws on the inside door handle cover. These screws are the inner and outer door handles that are fixed together.

2. Pull the two screws counterclockwise with a Phillips screwdriver, pull the inner door handle away from the door, and pull the outer door handle away from the door.

3. Fix the outer edge of the latch door with a Phillips head screwdriver to remove the two screws. Go out the door and pull out the latch plate assembly.

4. Use a Phillips screwdriver counterclockwise on the two fixed strike plate door frames to pull the door frame plates off.

L18-Electromechanical cabinet handle

Using SUS304 material

Tubular handle:

Tube body: SUS304 stainless steel, sandblasted and electrolytically brightened

Feet: black, matte finish

End cap: Polyamide (PA)

Installation: feet with threaded blind holes

Uses: general machine tools, electric control cabinets, kitchenware